Miwang Cable&Mesh: suction strainer manufacturer and suction strainers wholesaler in China.

Founded in 1992, China Miwang Cable&Mesh Co., Ltd. is large enterprise specialized in suction strainer manufacturer and suction strainers wholesaler various cable, wire, mesh, filter, strainer, netting and wire mesh products. We have established perfect production and management systems of wire drawing, zinc plating (calorification and galvanization), meshing, packing and transportion. Our OEM and custom suction strainer products are widely used in machinery, electronics, petroleum, chemical, metallurgy, Medicine, environmental protection, national safety and other fields. In the face of market competition, our company implements ISO9001 quality management system and ISO14001 environment management system.

The Suction Series Strainer promotes a compact design with multiple configurations to fit the exact end use application. The Standard Suction Strainer has a molded PVC Body and 304 Stainless Screen. A Black Nylon Body with 304 Stainless Screen is available. PVC Suction Strainers have a Female Friction Fit and are called out according to the size of a Female NPT fitting. Nylon Suction Strainers have a true threaded Female NPT connection.
PVC Body Options 1/4, 3/8, 1/2, 3/4, 1, 1-1/2 Female NPT
1/4, 3/8 Hose Barb
Nylon Body Options 1/2, 3/4, 1 Female NPT
Screen Options 20, 30, 40 (Standard), 80 Mesh 304 Stainless

HYDAC Suction Strainer Elements are designed for installation into suction lines of pumps. Extra caution should be taken to ensure that the suction elements are always mounted below the minimum oil level of the reservoir. Standard models have nominal filtration ratings of 74 or 125 microns. The suction strainer elements can also be supplied with a bypass valve to reduce high pressure drops caused by contaminated elements or high viscosity fluids during cold starting. The bypass valve opens at 3 psi. For best results, suction strainer elements should be sized for clean element pressure drops off no higher than 0.5-.07 psi.
HYDAC suction Strainer Elements are manufactured using stainless steel wire screen media. Suction strainer elements are only intended to protect hydraulic pumps against catastrophic failure caused by coarse contaminants. Suction strainer elements should be inspected and cleaned regularly. Suction strainer elements should not be used as the only filtration elements in a hydraulic system. Pressure filters and return line filters, with reasonable dirt holding capacity, must be installed to provide protection against component damage caused by fine contaminants.

suction strainers show

	The Suction Series Strainer promotes a compact design with multiple configurations to fit the exact end use application. The Standard Suction Strainer has a molded PVC Body and 304 Stainless Screen. A Black Nylon Body with 304 Stainless Screen is available. PVC Suction Strainers have a Female Friction Fit and are called out according to the size of a Female NPT fitting. Nylon Suction Strainers have a true threaded Female NPT connection. PVC Body Options 1/4, 3/8, 1/2, 3/4, 1, 1-1/2 Female NPT 1/4, 3/8 Hose Barb Nylon Body Options 1/2, 3/4, 1 Female NPT Screen Options 20, 30, 40 (Standard), 80 Mesh 304 Stainless
	HYDAC Suction Strainer Elements are designed for installation into suction lines of pumps. Extra caution should be taken to ensure that the suction elements are always mounted below the minimum oil level of the reservoir. Standard models have nominal filtration ratings of 74 or 125 microns. The suction strainer elements can also be supplied with a bypass valve to reduce high pressure drops caused by contaminated elements or high viscosity fluids during cold starting. The bypass valve opens at 3 psi. For best results, suction strainer elements should be sized for clean element pressure drops off no higher than 0.5-.07 psi. HYDAC suction Strainer Elements are manufactured using stainless steel wire screen media. Suction strainer elements are only intended to protect hydraulic pumps against catastrophic failure caused by coarse contaminants. Suction strainer elements should be inspected and cleaned regularly. Suction strainer elements should not be used as the only filtration elements in a hydraulic system. Pressure filters and return line filters, with reasonable dirt holding capacity, must be installed to provide protection against component damage caused by fine contaminants.
wiremesh