Miwang Cable&Mesh: woven wire mesh manufacturer and woven wire meshes wholesaler in China.

Founded in 1992, China Miwang Cable&Mesh Co., Ltd. is large enterprise specialized in woven wire mesh manufacturer and woven wire meshes wholesaler various cable, wire, mesh, filter, strainer, netting and wire mesh products. We have established perfect production and management systems of wire drawing, zinc plating (calorification and galvanization), meshing, packing and transportion. Our OEM and custom woven wire mesh products are widely used in machinery, electronics, petroleum, chemical, metallurgy, Medicine, environmental protection, national safety and other fields. In the face of market competition, our company implements ISO9001 quality management system and ISO14001 environment management system.

Woven wire mesh
Woven wire mesh is facture of screen that desirable product for doors and windows.
Woven wire mesh is cloth made from wire strands. The wires that make up wire mesh run parallel to the width of the roll and parallel to the length. The cross and line wires are interwoven. That is, the wires cross over and under each other. Wire Mesh can be woven in a number of different styles depending on the material type, wire diameter, and opening size. Woven wire mesh is available in rolls, sheets or panels, and cut-to-size.Through decades of experience, Thai Wire Metal has accumulated the right technique to produce the best quality of insect netting at a very competitive price. Our products are widely accepted from customers worldwide.

1) 10 gauge steel wire woven into 1-1/2" diamond mesh, securely attached to framing
2) Vertical frame: 1-1/4 x 5/8" cold rolled 'C' steel channels with 1/4" bolt holes
3) Horizontal frame: 1 x 1/2" cold rolled steel channels
4) All joints are mortised and tenoned
5) Center reinforcing bar: two cold rolled steel channels 1 x 3/8" riveted through wire mesh at 3'6" from floor, additional bar required for 12' high partition
6) Top capping bar: 1-1/2 x 1" cold rolled steel channel, with 1/4" bolts 30" O.C.
7) Corner posts: 1-1/2 x 1-1/4" steel angles with 1/4" bolt holes
8) Floor sockets: cast aluminum
9) Door frame: 1-1/4 x 1/2" cold rolled steel channel
10) Sliding doors have two four-wheel roller bearing truck/hangers enclosed in a galvanized steel box track and one steel channel bottom guide
11) Hinge doors have 1-1/2 pairs of butt hinges bolted to door and transom frame
12) Locking clasps arranged for padlocking or cylinder mortise lock outside with recessed knob inside available
13) All partitions have 3" sweep space and include hardware and accessories for proper installation, specify partition to wall connection hardware separately
14) Surface finish: one shop coat gray powder coated

woven wire meshes show

	Woven wire mesh Woven wire mesh is facture of screen that desirable product for doors and windows. Woven wire mesh is cloth made from wire strands. The wires that make up wire mesh run parallel to the width of the roll and parallel to the length. The cross and line wires are interwoven. That is, the wires cross over and under each other. Wire Mesh can be woven in a number of different styles depending on the material type, wire diameter, and opening size. Woven wire mesh is available in rolls, sheets or panels, and cut-to-size.Through decades of experience, Thai Wire Metal has accumulated the right technique to produce the best quality of insect netting at a very competitive price. Our products are widely accepted from customers worldwide.
	1) 10 gauge steel wire woven into 1-1/2" diamond mesh, securely attached to framing 2) Vertical frame: 1-1/4 x 5/8" cold rolled 'C' steel channels with 1/4" bolt holes 3) Horizontal frame: 1 x 1/2" cold rolled steel channels 4) All joints are mortised and tenoned 5) Center reinforcing bar: two cold rolled steel channels 1 x 3/8" riveted through wire mesh at 3'6" from floor, additional bar required for 12' high partition 6) Top capping bar: 1-1/2 x 1" cold rolled steel channel, with 1/4" bolts 30" O.C. 7) Corner posts: 1-1/2 x 1-1/4" steel angles with 1/4" bolt holes 8) Floor sockets: cast aluminum 9) Door frame: 1-1/4 x 1/2" cold rolled steel channel 10) Sliding doors have two four-wheel roller bearing truck/hangers enclosed in a galvanized steel box track and one steel channel bottom guide 11) Hinge doors have 1-1/2 pairs of butt hinges bolted to door and transom frame 12) Locking clasps arranged for padlocking or cylinder mortise lock outside with recessed knob inside available 13) All partitions have 3" sweep space and include hardware and accessories for proper installation, specify partition to wall connection hardware separately 14) Surface finish: one shop coat gray powder coated
wiremesh